SONITEK ARBOR STYLE
Heat Staking Press


MODEL TS 100

The Sonitek 100 series hand operated press is ideal for low volume production runs or for prototyping applications. The 100 series press is available with a 340 watt tapped (1/4-28) probe. Our temperature controller is a state of the art microprocessor based, auto-tuning, P.I.D based unit. With seventeen different standard models to choose from and a virtually limitless arrangement of custom tooling available, the Sonitek 100 series Thermal Press is an ideal assembly press no plastics house should be without.

 

Insertion
Hot Knife De-Gating
Staking
Date Coding/Serialize
Standard tips available for 
inserts
 up to 3/8" or M10
Heated sharp blades with beveled 
edge can cut gate flush to -.010
Custom platens available to stake 
several studs/tabs simultaneously.
Use type holders or multi-wheel 
numbering for permant part I.
D.

FEATURES
OPTIONS
• Tapped probe/platens (1/4-28) for interchangeable tips.
• Cast aluminium base.
• 1 1/4" diameter solid stainless steel column.
• 3" stroke distance.
• Gross head height adjustment.
• 80-999°F operating range.
• Quick change-over tool mount design.
• Solid state technology.
• Lever actuated with spring-loaded return.
• Adjustable locking positive stop.
• J-type built-in thermocouple.
• Operates on 110/115 VAC, 50/60Hz (220 available)
• Up to six outputs and two temperature zones.
• Hydraulic speed control.
• Cycle timer and signal light
• Extended column height (up to 36").
• Large platens ( up to 6"x6").
• Set of 8 insertion tips .080" - 3/8" (M2.0-M10|).
• Hot knife beveled blade up to 1" long (1/4"-28 thread) for degating/cutting
• Dual adjustable probe mount (adjust from 2 - 8").
• Customized fixturing.
• Elongated heater probes.
• Set of eight staking tips 1/32" to 1/4" dia. studs.
• Out of temperature alarm (light).
• Post cooling kit.
• Machine stand with casters.

SONIC WELDERS, DRILL PRESSES &
VMC CONVERSION KITS

MODEL TS100
*Shown with a 3" x 3" heated platen.
Click Here to view Image
portfoliosmall
MODEL TS100
*Shown with thermal probe.
Click Here to View Image
portfoliosmall

Sonitek Thermal Conversion kit (TCK) for sonic welders, drill presses and or VMC's allows you to easily convert your idle machine into a thermal press (and back again) with our 100 series controller and "dummy stack". Standard tooling for the TCK includes your choice of a probe or a 3" x 3" platen.
Choose from the following model numbers:

TCK100-B
Fits Branson 400 & 800 Series, S&M 1085, USS PT20.
TCK100-D
Fits all Branson 900 Series, 5170, 8800 & Dukane heavy duty thrusters.


OR
Buy TS 100 Hand Arbor Press for Heat Staking

TCK100-F
Fits S&M 1080, Dukane slim line.
TCK100-K
For drill presses & VMC’s.
TCK100-T
Timer expansion option.
Local Sales & Service