Output Power: 1500 electrical watts to converter 1450 mechanical watts to load

Output Frequency: 20 KHz

Output Amplitude: Variable (with boosters)

Weld cycle range: 0.1-4.0 seconds

Hold cycle range: 0.05-3.0 seconds

Maximum force on part: 440 lbs. @ 100 psig (1.96kN @ 690kPa)

Dynamic triggering range: 15 lbs. to 165 lbs. (67-734N)

Power requirements: 200-250V, 8-1/2 Amps., 50/60 Hz

Pneumatic Requirements: Clean, dry unlubricated air @ 100 psig(690kPa)Max

Dimensions

Base: Height: 4.62" (117 mm) Width: 16" (16.37 mm) Depth: 27.83" (740 mm)

Column: Diameter 3-1/2" (9 cm) Length: 36" (91.4 cm) ­ Long columns available on special order

Housing: Height: 33-1/8" (84.1 cm) Width: 7-1/4" (18.4 cm) Depth: 20-1/2" (52 cm)

Stroke: 2-7/8" (7.3 cm)

Throat: 12-3/8" (31.4 cm) center of horn to center of column

Weight:* 120V unit ­ 125 lbs. (56.7 kg) 200-250V unit ­ 138 lbs. (62.6 kg)
* Does not include converter, booster, or horn.

Benefits:

• Consistent, reliable set-up
• Compact foot print
• Easy to use, operate, and maintain
• Service available in 24 hours or less
• Versatile, fast, assembly technique

Options

• Choice of aluminum booster
  Booster ratio: .5:1, .6:1, 1:1 1:1.5, 1:2, 1:2.5
• Titanium boosters
• Pretrigger switch kit
• Lower limit switch kit
• Upper limit switch kit
• Remote start cable
• Hubs for modular mounting

Key features:

• Snap in converter
• Full 360 degree rotation of the stack for ease of set up.
• Integrated power supply
• Horn down button
• Front panel mounted speed control
• Parts counter option
• Standard fixture mounting holes
• Positive stop control
• Ergonomic base and palm button placement
• Counter balanced head assembly

Home l I Ultrasonics I Heat Staking I Leasing Info