Model S-5 BASIC Thermal Press

This compact bench-top heatstaking press is ideal for small applications! The model S-5 shown above (in different view angles) is capable of up to 510 lbs. of force (Higher force models also available). It is available with up to SIX (6) temperature zones with more if needed on a separate controller. These modular designed presses are also available without the base (LB Models) for use in custom systems. Actuator/thruster (LT Models) available without stand or base for remote/tight locations.

Information:

CAD Drawings ( .PDF )

84 Research Drive Milford, CT 06460
Tel: (203) 878-9321
Fax: (203) 878-6786
email: spectrum@sonitek.com

Specifications:

Model	BASIC S-5
Power requirements:	110 or 220V
Current draw:	Application Dependent
Pneumatic requirements:	Clean Dry Air @ 100 PSIG (690 kPa)
Maximum Force on part @ 100 PSIG	510 lbs (231.3 kg)
Air Consumption in CFM at 5 CPM:	.88 CFM at full stroke of 4.9”
Stroke Length	4.9” (125mm)
Head Height Clearance	0-22” (0-559)
Throat Depth	6” (152mm)
Weight	155 lbs (70 kg)
Ambient Temperature	41-122 F (5-50C)

Available Options:

Velocity/Depth Control (VCU Unit)

Velocity and Depth Control Unit (VCU) provides more precise control for head speed and final stroke distance. Two models available with long and short stroke options.