Ultrasonic Horns

Available in titanium, aluminium or hardened steel!

Exponential & Catenoidal Horns

These horns are available with tapped faces for replaceable tips up to 1' in diameter or with solid faces up to 2-1/2' and are available in titanium, aluminium or hardened tool steel. All tapped horns are machined from titanium. Special faces can be machined onto these designs including contour milling and EDM machining.

Rectangular Horns 26' Long

Standard designs are available in lengths up to 26" long with a 2-1/2" maximum width. All of our horns are designed to vibrate with even amplitude across the entire face at reduced power.

Round Horns: Solid & Hollow

These horns are available with high or low gain ratios and are made from titanium or aluminium. The face diameter (working surface) can start at .010" O.D. and any dimensions up to 6" with a flat solid face. Plating such as hard chrome, carbide coatings and titaniums nitride are commonly used to protect against wear.

Block Horns/ Couplers

Machined from aluminium only, these horns are available up to 9" x 12". They require higher power units to run efficiently. Extender horns are sometimes attached to the face to weld applications requiring high amplitude or for parts with high profiles requiring deep relief cuts into a horn's face

composite block
Composite Designs

Composite designs with standard horns allows us to provide concentrated energy where it needs to be. Any combination of horns can be "COUPLED" together to solve your welding application.

composite block
Round Solid Horns

(Larger horns have slotted faces) Up to 12-1/8" O.D. these horns are the most efficecient designs for ultrasonic welding.

composite block